General Information - WEG Cassia Gateway X1000 Guía De Configuración

1 GENERAL INFORMATION

To connect the WEG Motor Scan sensors to the Motor Fleet Management (MFM) solution, the X1000
Gateway must be correctly set and connected to the internet, as shown in the General Installation
and Operation Manual - Cassia X1000
This guide is complementary to the Gateway manual, containing additional practical aspects and
recommendations for the operation of the system.
Figure 1.1 on page 4 and Table 1.1 on page 4
and the digital MFM solution.
dongle
Figure 1.1: Diagram of possible connections from the Gateway to the MFM cloud
Table 1.1: Types of possible connection from the Gateway to the MFM cloud
1
2
3
4
5
Determine the operator that offers the best coverage for the location.
(1)
For tests only, according to
(2)
TEST on page 7
Requires specific releases and settings, according to
(3)
CONNECTION REQUIREMENTS on page
Gateway.
show the possible connection types between the X1000 Gateway
cassia.weg
Motor Fleet
Management
2
1
USB
Gateway
(**)
WEG Motor Scan
Sensors
(up to 100)
Connectivity to Gateway
Dongle + USB Port
Dongle + Wi-Fi Network
Mobile Phone + Wi-Fi network
(²)
Wi-Fi Network
Ethernet Cable
Chapter 3 GATEWAY TO MFM CONNECTION
of this guide.
(*)
Internet /
User
Network User
3
4
5
Ethernet
(*) Requires specific releases
and settings.
(**) Power supply:
Power Over Ethernet (POE).
Connectivity to MFM Cloud
3G/4G mobile network
3G/4G mobile network
3G/4G mobile network
User's Internet
User's Internet
Chapter 2 INTERNET
6.
Configuration and Commissioning Guide | 4
General Information
(¹)
(¹)
(¹)
(³)
(³)