Set Heating Fan Control - Honeywell RTH1100 Guía De Instalación Rápida

Quick Installation Guide
7

Set Heating Fan Control

Set jumper, on the back of the thermostat, if you have
connected a wire to the G terminal.
Leave the jumper
HG
in this factory-set
position if you
have a gas or oil
furnace.
HE Place the jumper
to this position if
you have an elec-
tric furnace.
Incorrect jumper setting: An incorrect setting is notice-
able in a gas or oil heating system. When heating starts,
you will initially feel cold air coming out of the vents as
the fan is running before the furnace has enough time to
heat up the air.
69-2446ES—01 8
Jumper
M29992