Idiomas disponibles
Idiomas disponibles
4
4. Reconnect the hood latch release cable to the back of
new hood latch assembly. Position the new hood
latch (A) with the alignment marks and secure with
two (2) hex bolts. Tighten bolts to 9 Nm (80 in. lbs.)
5. Connect hood switch harness (B) to the hood
latch assembly.
6. Carefully pry back the radiator cover panel.
Route the switch harness (B) over towards the
driver side along the existing vehicle harness.
Feed the switch harness under the hoses and
brackets as shown. Secure with cable ties (E).
9/16/16
