Securing The Tv To The Wall; Anti-Theft Kensington Lock - Samsung UN19D4003 4 Serie Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your

children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious

injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install

the anti-fall device for safety purposes, as follows.

To avoid the TV from falling

✎

Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

1. Drive the screws into the clamps and firmly fasten them onto the

wall. Make sure the screws are firmly fixed into the wall.

✎

Screw Specifications

y For a 32 ~ 40 Inch LCD TV: M6

For a 19 ~ 27 inch LED TV: M4

For a 32 ~ 65 inch LED TV: M8

2. Remove the screws from the center back of the TV, put the

screws into the clamps, and then fasten the screws onto the TV

again.

3. Connect the clamps fixed onto the TV and the clamps fixed onto

the wall with a strong string and then tie the string tightly.

✎

Verify all connections are properly secured. Periodically check

connections for any sign of fatigue for failure. If you have

any doubt about the security of your connections, contact a

professional installer.

✎

Install the TV near to the wall so that it does not fall backwards.

✎

It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

Untie the string before moving the TV.

The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public

place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual

provided with the Kensington Lock for additional information on proper use.

✎

Please find a "K" icon on the rear of the TV.

A kensington slot is beside the "K" icon.

✎

The position and color may differ depending on the model.

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large, stationary object such as

desk or chair.

2. Slide the end of the cable with the lock attached through the looped end

of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on the product (1).

4. Lock the lock.

✎

These are general instructions. For exact instructions, see the User

manual supplied with the locking device.

✎

The locking device has to be purchased separately.

✎

The location of the Kensington slot may be different depending on the TV model.