Cisco Linksys NAS200 Guía De Instalación Rápida página 9

Installation
Subnet Mask
of the other devices on your network. The default is 255.255.255.0.
Gateway
default is 192.168.1.1.
Click Next.
P.
Select the appropriate
configuration for your drive usage:
WARNING:
drive(s), back up pre-existing
data because all data on your
drive(s) will be erased when
they are formatted.
NOTE:
information, click Help.
Maximum Storage - Two separate disks (Recommended)
separately.
Maximum Storage - Two disks configured as one large disk
(JBOD/LVM)
Maximum Data Security - Mirroring (RAID 1)
Maximum Speed - Striping (RAID 0)
Click Next.
10
Enter the Subnet Mask, which must match the subnet mask
If you have a router on your network, enter its IP address. The
Before you format
If you need more
Drives seen as a single virtual drive.
Select Drive Configuration Select Drive Configuration
Requires two hard drives.
Requires two hard drives.
Drives seen