Cisco Linksys NAS200 Guía De Instalación Rápida página 6

J.
Connect one end of the included
Ethernet network cable to the
Ethernet port of the Network
Storage System.
Connect the other end to one of
the router's local network ports.
Click Next.
K.
Connect the power adapter to the
Power port of the Network Storage
System.
Connect the power cord to the
power adapter. Plug the power cord
into an electrical outlet.
Press the Power button on the
back panel of the Network Storage
System. The Network Storage
System beeps once when it is ready.
Click Next.
Connect Network Cable Connect Network Cable
Connect Power Connect Power
Installation
7