ATTACH THE H2 DRAWER FRONT
1. Install two #8-32 x 1/2" screws [203-1219] WITHOUT washers on the bottom of each bracket in the drawer front. Do not thread all
the way through so that the screws can be hung on the keyholes in the next step.
2. Hang the drawer front on the two keyholes on each side of the drawer box.
3. Install the remaining screws WITH washers [203-1198] into the two remaining threads in the drawer front bracket. Tighten all screws
after the drawer front is level and even with the side kits.
4. Snap the screw covers [211-1095] over the screws by squeezing gently at "Robern".
1
3
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
2
4
11
Part no. CB-209-1335 04/06/20
Freestanding Cartesian / Profiles Vanity
Capítulos
