Conformance With European Directives - Kollmorgen AKD 2G Manual Del Usuario

AKD2G Safety Notes | 9 Approvals

9.2 Conformance with European Directives

Beta Drives: CE in process.
CE Declarations of Conformity can be found on the Kollmorgen website.
The drives have been tested by an authorized testing laboratory in a defined configuration,
using the system components that are described in this documentation. Any divergence from
the configuration and installation described in this documentation means that the user will be
responsible for carrying out new measurements to ensure conformance with regulatory
requirements.
Kollmorgen declares the conformity of the product series AKD2G with the following dir-
ectives:
These devices can cause high-frequency interferences in non industrial environments and
may require measures for interference suppression (such as additional external EMC fil-
ters).
Maximum cable length for digital I/O supply (24V/DGND) is 3 m. If longer cables are
required, the user need to take care of additional EMC measures.
AKD2G-Sxx-6Vxx
AKD2G-Sxx-6Vxx drives do not have integrated ac line EMC filters. External mains filters
are described in the Accessories Manual (1~: FN2090, 3~: FN3288).
With external EMC mains filters for noise emission the AKD2G-Sxx-6Vxx meet the noise
immunity requirements of the second environmental category (industrial environment) to a
product of the category C2 (motor cable < 10 m).
With a motor cable length of 10 m or longer and external mains EMC filters, the AKD2G-Sxx-
6Vxx meet the requirement of category C3.
AKD2G-Sxx-7Vxx
AKD2G-Sxx-7Vxx drives have integrated EMC filters.
The AKD2G-Sxx-7Vxx meet the noise immunity requirements to the 2nd environmental cat-
egory (industrial environment).
For noise emission the AKD2G-Sxx-7Vxx meet the requirement to a product of the Category
C2 (motor cable < 10 m).
With a motor cable length of 10 m or longer, the AKD2G-Sxx-7Vxx meet the requirement to
the Category C3.
68 Kollmorgen | kdn.kollmorgen.com | February 2020
EC Directive 2006/42/EU, Machinery Directive
Used harmonized standard EN 61800-5-2
EC Directive 2014/35/EU, Low Voltage Directive
Used harmonized standard EN 61800-5-1
EC Directive 2014/30/EU, EMC Directive
Used harmonized standard EN 61800-3