Inserting/Changing The Battery In The Scales; Setting Up The Appliance; Operation; Weighing Items - Silvercrest SKWG 5 A1 Instrucciones De Uso

Inserting/changing the battery in the scales

NOTE
Insert only one 3 V CR2032 button cell battery into the battery compartment 6!
1) Turn the scales over and place them on a soft surface so as not to scratch
2) Open the battery compartment 6.
3) Remove the old battery, if inserted.
4) Insert the new battery. Note the polarity marked in the battery compart-
5) Close the battery compartment 6.
NOTE
►

Setting up the appliance

Place the scales on a level, non-slip surface.
CAUTION – PROPERTY DAMAGE
►

Operation

Weighing items

1) Press down on the glass plate 1. The appliance switches on. The display 2
2) If you wish to change the unit or the system, press the UNIT button 4 until
GB │ MT
│
■ 42
the surface.
ment 6!
If the battery in the scales is getting weak, the display 2 will show "Lo".
Please replace the battery.
This appliance is equipped with non-slip rubber feet.
Furniture surfaces may be made of a variety of materials and are treated
with many different types of cleaning agents. Therefore, it is not possible
to entirely exclude the possibility that some of these materials contain
substances that could corrode and soften the appliance's rubber feet. If
possible, place an anti-slip mat under the feet of the appliance.
shows "0", the selected measurement unit and the measurement system.
the required unit of measurement is shown on the display 2. You can
choose between:
SKWG 5 A1