Care And Storage; Replacement Parts And Wearing Parts - Beurer ELLE HLE 50 Instrucciones Para El Uso

changing the attachment:
• To replace an attachment, press the unlock button and take the epilator attachment off the device. You
can remove the fixing cap from the epilator attachment by pressing the attachment hooks outwards.
• Pay attention to the markings when placing the fixing cap or the precision attachment back on the epila-
tor attachment.
• The arrows on the attachment and the fixing cap must point in the same direction.

5. care and storage

WarnIng
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Clean the epilator attachment and exfoliation attachment with the cleaning brush. We recommend
that you moisten this beforehand with alcohol to guarantee a hygienic clean. Brush the attachments
out from behind while you turn the roller by hand.
• Make sure that the relevant attachment is completely dry before you put in back on the device.
• Do not use the device again until it is completely dry.
• Do not clean the device in the dishwasher.
• Do not use aggressive cleaning agents or hard brushes.
First unplug the device and allow it to cool off. Then you can clean it with a soft, slightly moistened cloth.
Then wipe it dry with a soft, lint-free cloth.

6. Replacement parts and wearing parts

Replacement parts and wearing parts are available from the corresponding service address (according to
the service address list). Please state the corresponding order number.
Set with epilator attachment,
precision attachment, fasten-
ing cap and protective cap
Exfoliation attachment
Mains adapter
Cleaning brush
Charger/base station
Item number and/or order number
163.271
163.274
163.277
163.268
163.320
11