Moulinex infiny press revolution Manual Del Usuario página 12

Clean the residue exit (K) with a lightly moist and non-abrasive sponge.
The pusher (A), the feed tube (B), the bowl (G), the stem (C), the juice collector (H) with the spout
with drip-stop (I), the jugs (N), and the foam separator (O) can all go into the dishwasher. If the
filters (D/E) are clogged, prewash them with warm water and washing up liquid and use the brush
(P). If the filter residue exit is clogged, remove the residues using the back end of the brush (P).
Do not clean the juice collector (H), the spout with drip-stop (I), the plastic parts (bowl (G), food
presser (A), feed tube (B)) with the abrasive side of the sponge.
Tips: To extract the stem (C) from the filter (D/E), turn both pieces together and then press on the
stem.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS
The appliance does not turn on - Make sure that all parts are correctly assembled.
The appliance stops suddenly
while functioning:
the red light flashes
The appliance turns off:
the white light flashes
Poor juice extraction
Problems related to
watertightness
END-OF-LIFE ELECTRICAL OR ELECTRONIC PRODUCTS
Think of the environment!

Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
12
- Make sure that your appliance is properly plugged in.
- Check that the feed tube (B) is correctly locked in position.
- Press the Start/Stop button (M) to switch off the appliance.
- Start your appliance again. If the safety mechanism shuts the
appliance off again, take it apart, clean it and turn it on again.
- Make sure that the stem (C) is not blocked.
- This is a safety mechanism. We recommend that you let the
appliance cool down for a few minutes, clean it, and then
restart it by pressing the Start/Stop button (M).
- Clean the appliance: wash, rinse out and dry: the feed tube
(B), the pressing stem (C), the filter (D or E), the residue
strap (F), the bowl (G), the jugs, and the spout (H and I).
- Make sure that the strap (F) is correctly positioned on the fil-
ter (to collect residues) and that it is in good condition.
- Check that all parts are correctly assembled, especially the
'spout with drip-stop (I).
SOLUTIONS