Diode.test - Beta 1760/RMS Manual Del Usuario

DIODE TEST
WARNING:
To.avoid.electric.shock,.do.not.test.any.diode.that.has.voltage.on.it.
1 Set.the.function.switch.to.the.
2 Insert.the.black.test.lead.plug.into.the.COM.socket.and.the.red.test.lead.plug.into.the.
socket.
3 Press.the.MODE.button.until.".
4 Touch. the. test. probe. tips. to. the. diode. or. semiconductor. junction. you. wish. to. test.. Note. the.
meter.reading.
5 .Reverse.the.probe.polarity.by.switching.probe.position..Note.this.reading.
6 The.diode.or.junction.can.be.evaluated.as.follows:
• If.one.reading.shows.a.value.and.the.other.reading.shows.OL,.the.diode.is.good.
• If.both.readings.show.OL,.the.device.is.open.
• If.both.readings.are.very.small.or.zero,.the.device.is.shorted.
Note:
The.value.indicated.in.the.display.during.the.diode.check.is.the.forward.voltage.
.position.
.".appears.in.the.display.
0
.