Idiomas disponibles
Idiomas disponibles
AC current measurement
1
Insert.the.black.test.lead.plug.into.the.negative.(COM).socket.
2
For.current.measurements.up.to.110µA,.set.the.function.switch.to.the.µA.position.and.insert.the.
red.test.lead.plug.into.the.(110µA).jack.
3
For.current.measurements.up.to.110mA,.set.the.function.switch.to.the.mA.range.and.insert.the.
red.test.lead.banana.plug.into.the.(mA).jack.
4
For.current.measurements.up.to.10A.AC,.set.the.function.switch.to.the.A.position.and.insert.the.
red.test.lead.banana.plug.into.the.10A.jack.
5
Press.the.MODE.button..The.measurement.mode.will.change.between.AC.or.DC.as.required.
6
Remove.power.from.the.circuit.under.test,.then.open.up.the.circuit.at.the.point.where.you.wish.
to.measure.current.
7
Touch.the.black.test.probe.tip.to.the.negative.side.of.the.circuit..And.touch.the.red.test.probe.
tip.to.the.positive.side.of.the.circuit.
8
Apply.power.to.the.circuit.
9
.Read.the.current.in.the.display..The.display.will.indicate.the.proper.decimal.point,.value.and.
symbol.
RESISTANCE [ Ω ] MEASUREMENT
WARNING:..
To.avoid.electric.shock,.disconnect.power.to.the.unit.under.test.and.discharge.all.capacitors.before.
taking.any.resistance.measurements..Remove.the.batteries.and.unplug.the.line.cords.
Capítulos
