Preparation For Wiring; Wiring - Craftmade PUH52 Guia De Instalacion

5. Preparation for Wiring.

Lift motor assembly to hanging bracket and slide slot
at one end of motor assembly over j-hook on
hanging bracket. This will allow motor assembly to
hang out of the way while wiring.
Tip: Seek the help of another person to hold the
stepladder in place and to lift the fan up to you once
you are set on the ladder.
Find a secure attachment point (wood ceiling joist
highly recommended) and secure safety cable. It will
be necessary to use a heavy duty wood screw, washer
and lock washer (not supplied) with the safety cable
loop. If necessary, adjust the loop at the end of the
safety cable. The loop at the end of the safety cable
should just fit over the threads on the wood screw.
Extra cable slack can be left in ceiling area.

6. Wiring.

CAUTION: Be sure outlet box is properly
grounded and that a ground wire (GREEN or
Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with
electrical wiring or if the house/building wires are
different colors than those referred to below,
please use a qualified electrician.
When fan is secured in place on the hanging
bracket, electrical wiring can be made as
follows:
Connect BLACK wire from fan to BLACK wire
from ceiling with wire connector provided.
Connect WHITE wire from fan to WHITE wire
from ceiling with wire connector provided.
Connect all GROUND (GREEN) wires together
from fan to BARE/GREEN wire from ceiling with
wire connector provided.
Since this fan does not come with a light kit,
you will need to cap off the BLUE wire with a
wire connector (as shown with arrow in diagram
at right). [Note: If you elect to purchase a light
kit for the fan, the BLUE wire from the fan must
be connected to the BLACK wire from the
ceiling instead.]
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
wood joist
j-hook
wood joist
outlet box
hanging
bracket
j-hook
motor assembly
page 4
safety cable
loop
safety cable
motor assembly
(supply circuit)
WHITE BLACK
SWITCH
GROUND
(GREEN
OR BARE)
BLACK
WHITE
GREEN
WHITE
BLACK
BLUE
wood screw
and washer
wire
connector
GREEN
*