Scroll Arm Assembly; Preparation For Wiring - Craftmade ASH60TBWB5 Guia De Instalacion

6. Scroll Arm Assembly.

Locate 4 pairs of scroll arm screws on outer edge
of top of motor housing and remove all 8 screws.
Align holes in small bracket at one end of scroll
arm with a pair of scroll arm screw holes in top of
motor housing. Re-insert* 2 scroll arm screws that
were previously removed and partially tighten.
Raise scroll arm support to align top of scroll arm
with one of the gaps on the scroll arm support.
Remove screw in gap on scroll arm support, place
top of scroll arm in gap and attach scroll arm with
screw that was just removed. Repeat with
remaining scroll arms.
*Secure scroll arm screws (at bottom of each
scroll arm) only after all 4 scroll arms have been
attached.
When ALL scroll arm screws are securely
tightened, lower downrod collar until it rests on
scroll arm support.

7. Preparation for Wiring.

With the hanging bracket secured to the outlet
box and able to support the fan, you are now
ready to hang your fan. Grab the fan firmly with
two hands. Slide downrod through opening in
hanging bracket and let hanging ball rest on the
hanging bracket. Turn the hanging ball slot until it
lines up with the hanging bracket tab.
WARNING: Failure to align slot in hanging ball
with tab in hanging bracket may result in serious
injury or death.
Tip: Seek the help of another person to hold the
stepladder in place and to help lift the fan up to
you once you are set on the ladder.
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) to secure safety cable loop. If necessary,
adjust the loop at the end of the safety cable. The
loop at the end of the safety cable should just fit
over the threads on the wood screw. Test safety
cable by pulling on loose end with pliers. If the safety
cable slips, the loop must be adjusted smaller.
Extra cable slack can be left in ceiling area.
downrod collar
scroll arm
support
gap
motor
housing
page 5
scroll arm screws
scroll arm
small
bracket
wood ceiling
joist
safety cable loop
wood screw
safety cable
hanging bracket tab
hanging ball slot
motor housing
and washer