Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS
BOULEVARD
- 1.28 gpf/4.8 Lpf One-Piece Toilet
®
Model 2891 - Elongated Right Height
TROPIC
- 1.28 gpf/4.8 Lpf One-Piece Toilet
®
Model 2786 - Elongated Right Height
TOWN SQUARE
®
Model 2847 - Elongated Right Height
TOWN SQUARE
®
Model 2851A - Elongated Right Height
Thank you for selecting American Standard – the benchmark of fine quality for over 140 years. To ensure this product is installed properly, please read
these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE: Pictures may not exactly define contour of china and components.
RECOMMENDED TOOLS AND MATERIALS
Regular Screwdriver
Wax Ring/Gasket
1
REMOVE OLD TOILET
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE: Mounting surface must be clean and level before new toilet is installed!
2
ROUGHING-IN DIMENSIONS:
NOTE: Distance from wall to closet flange centerline must be as listed below:
Model 2891 - BOULEVARD 1.28 gpf/ 4.8 Lpf
FINISHED WALL
29-3/4"
(756 mm)
7-1/2"
(192 mm)
C/L OF SEAT POST
HOLES 5-1/2"
(140mm) CENTERS
18-1/2"
(470 mm)
8-1/2"
13-1/2"
(217 mm)
(345 mm)
12"
(305 mm)
IMPORTANT: Water supply on the wall is required at 3-3/4" or 9" from centerline of the toilet (see rough-in).
First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation.
The second suggested position is next to the toilet. Between these two positions, the space for the supply
between wall and toilet is limited to 3-1/4". In this case, check your supply and hose dimensions.
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2019
- 1.28 gpf/4.8 Lpf One-Piece Toilet
S - 1.28 gpf/4.8 Lpf One-Piece Toilet
Adjustable Wrench
Flexible Supply Tube
14-1/2"
(368 mm)
14"
(350 mm)
SUPPLY
AS
REQUIRED
(position 1 or
position 2)
16-1/2"
3-3/4"
(419 mm)
(95mm)
9"
5-1/2"
(229mm)
(140mm)
(152mm)
FINISHED
14-1/4"
FLOOR
(364 mm)
with Seat
®
with Seat
®
with Seat
®
with Seat
®
Putty Knife
Sealant
Closet Bolts
Hacksaw
Model 2786 - TROPIC 1.28 gpf/ 4.8 Lpf
FINISHED WALL
8-1/8"
(206 mm)
30-1/2"
(778 mm)
6"
8-1/2"
(217 mm)
12"
(305 mm)
IMPORTANT: Water supply on the wall is required at 3-3/4" or 9" from centerline of the toilet (see rough-in).
First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation.
The second suggested position is next to the toilet. Between these two positions, the space for the supply
between wall and toilet is limited to 3-1/4". In this case, check your supply and hose dimensions.
Carpenters Level
Tape Measure
29-3/4"
(756 mm)
C/L OF SEAT POST
HOLES 5-1/2"
(140mm) CENTERS
SUPPLY AS
REQUIRED
18-1/2"
(position 1)
(470 mm)
OR
SUPPLY AS
REQUIRED
(position 2)
16-1/2"
(419 mm)
5-1/2"
(140mm)
13-1/2"
FINISHED
(345 mm)
FLOOR
C/L OF OUTLET AND
TOILET MTG BOLTS
16-3/4"
(424 mm)
14"
(355 mm)
30-1/2"
(778 mm)
3-3/4"
(95mm)
9"
(229mm)
6"
(152mm)
14"
(354 mm)
7301450-100 Rev. 3 8/19
Tabla de contenido
loading

Resumen de contenidos para American Standard Boilevard 2891

  • Página 9: Herramientas Y Materiales Recomendados

    Gracias por elegir American Standard - el parámetro de primera calidad por más de 140 años. Para asegurarse de que el producto esté instalado correctamente, por favor lea estas instrucciones cuidadosamente antes de comenzar. (Ciertas instalaciones pueden requerir ayuda profesional).
  • Página 10: Instalación Del Inodoro

    DIMENSIONES DE INSTALACIÓN: NOTA: La distancia desde la pared a la línea central de la brida de retrete debe ser la que se indica a continuación: Modelo 2847 - TOWN SQUARE 1,28 gpf/ 4. 8 Lpf Modelo 2851A - TOWN SQUARE S 1,28 gpf/ 4. 8 Lpf 29-7/8"...
  • Página 11: Cuidado Y Limpieza

    ADVERTENCIA: no use limpiadores dentro del tanque. Los productos que contienen cloro (hipoclorito de calcio) pueden dañar seriamente los accesorios del tanque. Esto puede provocar fugas y daños a la propiedad. American Standard no será responsable por ningún daño en los accesorios del tanque debido al uso de limpiadores que contienen cloro (hipoclorito de calcio).
  • Página 12: Solución De Problemas

    12. En los Estados Unidos: En Canadá: En México: American Standard Brands LIXIL Canada, ULC American Standard B&K México 1 Centennial Ave 5900 Avebury Rd. S. de R. L. de C.V. Piscataway, New Jersey 08854 Mississauga, Ontario Vía Morelos #330...

Este manual también es adecuado para:

Tropuc 2786Town square 2847Town square 2851a

Tabla de contenido