Festo CPX Serie Manual Del Usuario página 18

3.2 Setting the DIL switches
Set the operating mode with DIL switch 1:
Operating mode
Stand Alone / Remote Controller
Controlling the CPX terminal via the CPX−FEC:
Stand Alone or
Remote Controller Ethernet or
Remote Controller Field Bus (field bus node
with DIL switch set to Remote Controller" in
the CPX terminal required)
Remote I/O
Controlling the CPX terminal via Modbus/TCP
with a higher−order controller.
Reserved
Reserved
Please note
Check that the setting of the DIL switch is correct before
commissioning the CPX−FEC. A change in the operating
mode is not recognized until after Power OFF/ON.
18
DIL switch 1
Festo CPX−FEC 0404NH English