How To Use The Power Source - Omron Micro Air Manual De Instrucciones

How to Use the Power Source

How to Insert Batteries
Batteries are not supplied. Use two commercially available alkaline or NiMH AA batteries.
1
Remove the Battery Cover.
(1) Slightly rotate the Battery Cover Disengaging Lever
in the direction of an arrow.
(2) Remove the Battery Cover.
• The Battery Cover may not be removed easily when you try for the first time in order
to prevent water drop from getting inside the Unit.
2
Insert the batteries correctly by aligning the polarities
(+ and –) with the battery indication marks.
3 Put on the Battery Cover.
Put the Battery Cover on the Battery Case. Push in the Battery Cover
until it catches the claws and clicks.
Push both ends firmly.
• You may find it difficult to push it through because the unit is made to prevent water
from getting inside the Unit.
Battery replacement and battery life
When using alkaline batteries
The unit can be used for
approximately 8 days (if it is
used for 30 minutes a day.)
• The Battery Low Indicator
(orange) flashes.
→ Batteries are low. Replace both batteries
with new ones.
• The Battery Low Indicator (orange) turns on.
→ Batteries are worn out. As the unit will not
nebulize, immediately replace both batteries
with new ones.
Batteries
• If you store this unit with the batteries or rechargeable batteries in it, the batteries may leak and damage the unit.
• If you are not going to use the unit for a long period of time (more than three months), remove the batteries.
• Do not use worn and new batteries together or batteries of different types (such as regular batteries and
rechargeable batteries) together.
• Follow the disposal method determined by the local community when it comes to disposal of used batteries.
Bottom of the 2
Main Unit
1
When using NiMH batteries
– You may use NiMH batteries
(rechargeable batteries).
– If you use a commercially available battery
charger suitable for the batteries you are
using, you can save money by recharging the
batteries again and again.
The unit can be used for approximately 8 days
(if it is used for 30 minutes a day when the
batteries are fully charged.)
• The Battery Low Indicator (orange) flashes.
→ The rechargeable batteries have no residual
power. If the unit does not nebulize,
immediately recharge the batteries with
a commercially available charger.
• The supplied AC Adapter does not function
as a battery charger.
Use a commercially available battery charger
to recharge the batteries.
10
How to Use optional AC Adapter (optional)
Use the AC Adapter in a place where you have an electric outlet.
However, please note that this AC Adapter is not a battery charger.
1
Place the Main Unit on the AC Adapter Connection Stand as shown below.
2
Plug in the power plug of the AC Adapter to the electric outlet.
Connection is completed.
How to remove the AC Adapter from the Main Unit
(1) Unplug the power plug from the electric outlet.
(2) Unlock the Main Unit by pushing in both ends
of the Main Unit Locking Board of the AC
Adapter Connection Stand.
(3) Remove the Main Unit.
How to Use the Power Source
Main Unit Locking Board
Note: It will click and be locked to the Stand.
(1) Unplug
(3) Remove
(2) Push both ends
11