Idiomas disponibles
Idiomas disponibles
How to use the tool-holding accessories from S-TOOLS SYSTEMS
The S-Tools Systems range was developed to hold any type of tools that may accidentally fall and cause damage to property, or
serious injuries or even fatalities, to workers. In fact, objects dropped by workers are the second largest cause of worker deaths in
the workplace.
Very often, the consequences of a falling object are underestimated:
Directive 2001/45/CE §4.4.d : «the tools and other accessories to be used by a worker [at height] must be secured to the
worker's harness or seat or by some other appropriate means».
The fundamental steps :
1
Choosing the attachment
point on the tool
1) Choosing the attachment point on the tool:
This may be a hole on the handle or the body of the tool,
Ö
Or the body of the tool may serve as an attachment point.
Ö
If the above options are not available, the attachment point may be created on the tool directly :
Ö
Dropping a work tool also means the risk of destroying the tool, and the possible damage
to property can also have serious consequences in terms of costs, as well as the lost time
required by the worker to leave their work station to recover the tool.
When dropping tools cannot be prevented (using nets, confinement areas, etc.), then our
S-Tools Systems system range should be used.
WARNING! The use of these tool-holding lanyards (that are not PPE) does not
exempt you from the obligation of wearing PPE, in particular safety helmet.
2
Choosing the lanyard
connection
5
3
Choosing the anchor point
EN
