Description Of The Appliance; Additionally Required; Assembly; Start Up - Kärcher K 2.350 Manual Del Usuario

Description of the Appliance

The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Illustrations on Page 2
1 High pressure connection
2 Appliance switch „0/OFF" / „I/ON"
3 Storage hook for high pressure hose
and mains connection cable
4 Transport handle
5 Hose coupling
6 Coupling element for water connection
7 Water connection with integrated sieve
8 Detergent suction hose (with sieve)
9 Storage for trigger gun
10 Storage for spray lance
11 Mains cable with mains plug
12 Bearing wheel
13 Trigger gun
14 Lock trigger gun
15 Clamp for high pressure hose
16 High pressure hose
17 Spray lance with high pressure nozzle
For normal cleaning tasks.
18 Spray lance with Dirtblaster
For strong contaminations

Additionally required

Water supply hose
– Use a fabric reinforced water hose.
Minimum diameter, 1/2 inches (13 mm).
Minimum length 7.5 m.

Assembly

Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 2
Illustration
 Attach the transport handle.
Illustration
 Insert the transport wheels and lock
them.
Illustration
 Insert holder for trigger gun.
Illustration
 Pull out the clamp for the high pressure
hose from the trigger gun.
Illustration
 Connect high pressure hose to trigger
gun.
 Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
Illustration
 Screw the coupling element to the wa-
ter connection on the appliance.

Start up

 Park the appliance on an even surface.
Illustration
 Connect the high pressure hose to the
high pressure connection of the appli-
ance.
 Insert the mains plug into the socket.

Water supply

For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
For connection values, see type plate/tech-
nical data.
 Illustration
1 Screw the supplied hose coupling on to
the end of your water supply hose.
2 Attach the water supply hose to the
coupling on the water connection.
 Connect the water supply hose to the
water supply.
 Completely open the water tap.
English 7