Start and Programs
Choosing a program
EN
1. Plug the dryer into the electrical socket.
2. Sort your laundry according to fabric type (see
Laundry).
3. Open the door and make sure the filter is clean
and in place (see Maintenance).
4. Load the machine and make sure that the items
are not in the way of the door seal. Close the door.
5. Choose the drying program by checking the
Programs table (see Programs) as well as the
indications for each type of fabric (see Laundry).
- Set the temperature with the HEAT button.
- Select a program or drying time by rotating the
PROGRAMS knob clockwise.
4
6. Press the START button to begin.
During the drying program, you can check on
your laundry and take out items that are dry
while others continue drying. When you close
the door again, press START in order to resume
drying.
7. About 10 minutes before the program is
completed, it enters the final AIR FLUFF phase
(fabrics are cooled), which should always be
allowed to complete.
8. Open the door, take your laundry out, clean the
filter and replace it (see Maintenance).
9. Unplug the dryer.