Maytag MVWX5SPAW Manual De Uso Y Cuidado página 15

TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.maytag.com/help
If you experience
Washer not performing as expected (cont.)
Not cleaning or Not using HE detergent
removing stains (cont.) or using too much HE detergent.
Not using correct cycle
for fabric type.
Not using dispensers.
Not washing like colors together.
Small amount of water Normal dispenser operation.
still in dispenser after
cycle
Incorrect dispenser Clogged dispensers or laundry
operation products dispensing too soon.
Residual powder in dispenser.
Sharp items were in pockets during
Fabric damage
wash cycle.
Strings and straps could have tangled. Tie all strings and straps before starting wash load.
Items may have been damaged before
washing.
Fabric damage can occur if load
is tightly packed.
Liquid chlorine bleach may have
been added incorrectly.
Garment care instructions may
not have been followed.
Odors Monthly maintenance not done
as recommended.
Using wrong or too much detergent.
Tapa bloqueada (Lid The lid is not closed.
Locked) light is on
A cycle was stopped or paused using
the Inicio/Pausa/Desbloquear Tapa
(Start/Pause/Unlock) button.
for assistance and to possibly avoid a service call.
Possible Causes
The suds from regular detergent can keep washer from operating correctly.
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow manufacturer's directions based on load
size and soil level.
Use a higher soil level cycle option and warmer wash temperature to improve
cleaning.
Use Pesado (Heavy) and Llenado completo (Bulky) cycles for tough cleaning.
See the "Cycle Guide" to match your load with the best cycle.
Use dispensers to avoid chlorine bleach and fabric softener staining.
Load dispensers before starting a cycle.
Avoid overfilling.
Do not add products directly onto load.
Wash like colors together and remove promptly after the cycle is complete
to avoid dye transfer.
It is normal for small amounts of water to remain in dispenser.
Do not overfill dispenser, which causes immediate dispensing.
Always select Suavizante (Fabric Softener) option to assure proper dispensing.
Load dispensers before starting a cycle.
Homes with low water pressure may result in residual powder in the dispenser.
To avoid, select a warmer wash temperature if possible, depending on your load,
or use liquid HE detergent.
Use only liquid chlorine bleach in the bleach dispenser.
In wash water temperatures colder than 60° F (15.6° C), some detergents do not
dissolve well. Soils may be difficult to remove. To avoid, select a warmer wash
temperature if possible, depending on your load, or use liquid HE detergent.
Empty pockets, zip zippers, and snap or hook fasteners before washing to avoid
snags and tears.
Mend rips and broken threads in seams before washing.
Load garments in loose heaps evenly around the washplate. Do not load
garments directly over the center of the washplate.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 additional garments after washer is started.
Do not pour liquid chlorine bleach directly onto load. Wipe up bleach spills.
Undiluted bleach will damage fabrics. Do not use more than recommended
by manufacturer.
Do not place load items on top of bleach dispenser when loading and unloading
washer.
Always read and follow garment manufacturer's care label instructions. See the
"Cycle Guide" to match your load with the best cycle.
Run Limpieza de lavadora con affresh
every 30 washes. See "Cleaning Your Washer" in "Washer Maintenance".
Use only HE detergent. Be sure to measure correctly.
Always follow the manufacturer's directions.
See "Cleaning your Washer" section.
Close the lid. The washer will not start or fill with the lid open.
The washer may still be spinning. The lid will not unlock until the basket has
stopped spinning. This may take several minutes if washing large loads or heavy
fabrics.
Solution
(Clean Washer with affresh ) after
® ®
15