Silit Ecolare Indicaciones De Manejo Y Cuidado página 13

Operation
the timer the values must be reset to h:
and confirmed. To show the remaining time, the
timer must be reactivated. After seconds
the previously selected mode will be displayed
again.
Residual heat display
If the glass plate reaches a temperature exceed-
ing °C this will be indicated by the display
above the residual heat icon and the residual
heat icon on the display. The light will go off as
soon as the glass plate has cooled down. When
the residual heat icon is lit, do not touch the
glass surface under any circumstances due to
risk of burns!
Ventilator
The ventilator runs during all cooking processes
to cool the electronics. To protect the electron-
ics, the ventilator continues to run approx.
seconds after the device has been switched off
so that the electronics in the device do not over-
heat and get damaged. To conserve energy the
device should be turned off after each use using
the switch on the right on the rear. It is impera-
tive to wait until the ventilator has turned off by
itself, however.
14
. Press the timer button
min.
. Set the hours
. Confirm hours
. Set the minutes
. Confirm minutes
- 1 h
min
- 1
min
min
+ 1 h
+ 5
min