Safety Requirements - WYNN'S EPC Manual

EN
1. Never switch on a damaged machine. Wait until a Wynn's Representative
has checked it.
2. Wear safety goggles and gloves.
3. Never pour water, solvents, detergents, bactericides, disinfectants or colour-
ing matter into the machine.
4. Only use the machine as prescribed in the manual.
5. Immediately clean up spilled Eco liquid.
1. The liquid stays cold
• Check the power supply
• Check if liquid is above level of sensor
2. After pushing on pedal there is no liquid supply
• Check pedal switch
• Check pump
3. Cleaning action reduces
• Change filter and liquid. There is too little action of the enzymes.
• Liquid is cold.
4. Failures in fluid supply
• Check if hoses are not clogged
• Check pump
If the checked items function well, there must be another serious failure and
in this case you have to contact the Wynn's Representative.
5. Thermostat does not properly function
• If the liquid is too warm, immediately switch off the machine.

Safety Requirements

Possible Failures
4