Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HZ-2030_OM_Rev0.qxd
OPERATION / USING THE THERMOSTAT FEATURE
• Place the heater on a firm, level surface free from obstructions, and at least 3 ft. (0.9m) away from any
wall or combustible material.
• With the power selector knob in the OFF position, plug the heater into a
polarized 120V outlet.
• Turn the thermostat control fully clockwise to the HIGH (+) setting.
• To turn the heater on, push down on the child-resistant lock button, hold
down, and rotate the power selector knob clockwise to the desired
position (Fig. 1) (Fan only, Low - 900W, or High - 1500W).
• When the room reaches a comfortable temperature, slowly turn the
thermostat control counter-clockwise until the heater goes off. This is the point at which the
thermostat setting equals the room temperature. If left at this setting, the thermostat will automatically
turn the heater on and off to maintain the selected temperature.
• When you are finished using the heater, push down on the child-resistant lock button, hold down, and
turn the power selector knob to the OFF position.
NOTE: To use the fan only feature, depress the child-resistant switch, hold down, and turn the
power selector knob clockwise to the "Fan" setting. The thermostat should be turned to the
highest setting.
OTHER FEATURES
• This heater is equipped with Honeywell
the heater, a light will blink warning you there is an obstruction. If the object is not removed, after a
few seconds the sensor will disable the heater until such time as the object is removed. The heater
will restart after a few seconds.
• This heater is equipped with a reset button, should you choose to disable the auto-off sensing feature.
To revert back to normal sensing mode simply press the reset button again.
NOTE: If using this heater in an area where the auto-off sensor becomes an annoyance (i.e. high
traffic or movement area), you may choose to disable the auto-off sensing feature.
• This heater is equipped with a high temperature safety control and a thermal circuit breaker to help
prevent overheating.
• This heater was crafted using a high quality safety plastic which allows for the "Cool-to-the-touch"
exterior. If the heater grille is touched briefly, it will not cause a burn. For safe operation, do not
continuously hold bare skin against the grille.
• This heater has a convenient carrying handle for ease of use.
3/28/05
9:44 AM
Page 2
®
Smart Vision
Fig. 1
™
technology. If an object is placed too close to
Child Lock
Button
Tabla de contenido
