English - Wella Professionals Sahira Anti-Static Manual Del Usuario

Sahira anti-static – efficient care and
performance
The Wella Professionals Sahira anti-static combines profes-
sional performance and quality features with a fascinating
.
design The Wella Professionals Sahira anti-static provides a
distinctly high drying capacity and a particularly compact and
handy form.
1 Safety
Please read the instructions carefully, especially the chapter on
"Safety", before using the Wella Professionals Sahira anti-static.
Keep these instructions in a safe place for future reference. If you
pass on the appliance to someone else, be sure to hand over these
instructions as well.
• Please check whether the mains volt-
age corresponds to the voltage speci-
fied on the type plate.
• Do not use this appliance close
to baths, showers, washbasins
or other receptacles containing
water.
• Always pull the mains plug when the
appliance is not in use. Sources of wa-
ter in the vicinity of the appliance pre-
sent a danger even when it is switched
off.
• Additional protection is afforded by in-
stalling a residual current device with a
rated tripping current of less than
30 mA in your home electrical system.
We recommend you get an electrician
to install a residual current protection
system to protect the circuits.
• Regularly check the power cord for
damage.
• Do not wind the power cord around the
appliance. (Danger! Risk of cable
break!) If the power cord of the appli-
ance is damaged, it must be replaced
by the manufacturer or the manufactur-
er's customer services, or by similarly
qualified persons, in order to avoid en-
dangerment.
• This appliance can be used by children
aged 8 years and up and by individuals
with reduced physical, sensory or men-
tal capabilities or a lack of experience
and/or knowledge if they are super-
vised or have been trained in the safe
use of the appliance and have under-
stood the resulting dangers. Children
must not play with the appliance.
Cleaning and user maintenance must
not be carried out by children without
supervision.
• Never leave the appliance unattended
while it is switched on. There is a risk of
fire.
• Always make sure that the air inlet and
outlet are not blocked.
• Ensure that the mains plug cannot be
plugged in again during cleaning.
Specifications according to Machinery Directive
2006/42/EC
A-weighted emission sound pressure level at workstations
at a distance of 1 m, L pA = 73 dBA
measured maximum noise emission value including uncertainty
of measurement according to EN ISO 4871. Determination of
the values according to EN 60704-2-9 with reference to
EN 60704-1
Vibration total value to which the hand-arm system is sub-
2
jected, a h ≤ 2.50 m/s
measured maximum vibration total value including uncertainty
of measurement.
Determination of the values according to EN ISO 5349-1/2
Designation of the Parts
1 Air inlet mesh with protective screen
2 Type plate
3 Power cord with mains plug
4 Hang-up loop
5 On/Off switch and air flow switch:
0 (Off) / 1 (Slow) / 2 (Fast)
6 Temperature switch: 1 (Low) / 2 (Average) / 3 (High)
7 Professional cold shot button
8 Styling nozzle

ENGLISH

5