Best WM34I Manual Del Usuario página 10

6. Use adjustment screws on wall
brackets to level hood. Fig.11
7. From inside the hood, locate (2) holes
for drywall anchors. Mark their location
on the wall.
8. Remove hood from the wall and drill
(2) 5/16" holes. Install drywall anchors as
shown. Fig.12
9. Lift hood back onto wall mounting
brackets. Secure hood to the wall with
(2) 4.8 x 38mm mounting screws.
DUCTED AND NON-DUCTED
INSTALLATION WITH FLUE -
CONTINUE TO "INSTALL FLUE
MOUNTING BRACKET" SECTION
ON PAGE 10
NON-DUCTED INSTALLATIONS
WITHOUT FLUE -
SKIP TO "INSTALL BLADE GUARD"
SECTION ON PAGE 14
INSTALL FLUE MOUNTING
BRACKET
DUCTED OR NON-DUCTED HOOD
WITH FLUE
1. Center the mounting bracket directly
over the range hood location.
2. Secure the bracket to the wall using
(2) 4.8 x 38mm mounting screws and
drywall anchors. Fig7. Make sure the
bracket is tight against the wall and
centered over the hood. Fig.13
4.8 x 38 mm
SCREWS
DRYWALL
ANCHORS
MOUNTING
BRACKET
4.8 x 38 mm
SCREWS
- 10 -
FIG.11
DRYWALL
ANCHORS
FIG.12
CENTERLINE
OF HOOD
FIG.13