Celestron ECHELON Manual De Instrucciones página 6

SEttING tHE dIoptEr / FocuSING
The Echelon Series utilizes an individual focus
system which requires you to focus each
eyepiece to ensure a crisp, sharp image. This is
achieved by setting the diopter (located on each
eyepiece) before use.
To focus the binocular:
1. View an object through the binocular that is
beyond the minimum focus distance.
2. Cover the right objective lens with your hand
or the objective lens cap.
3. Rotate the left eyepiece until the image
viewed with your left eye is clear and sharp.
4. Cover the left objective lens with your hand or
objective lens cap.
5. Viewing the same object, rotate the right
eyepiece until the image viewed with your
right eye is clear and sharp.
I ENGLISH
4
6. Your binocular is now adjusted for this
distance. When viewing a different object,
adjust the focus for both eyes following steps
1-5 again.
TIp: Eyeglasses worn for nearsightedness should be worn when
using binoculars as you may not be able to obtain focus at
infinity without them.
Diopter
Adjustment Ring
Diopter
Adjustment Ring
Fig 3