Powerreclinexr & Powerreclinexrw Troubleshooting; Furniture Placement Guide & Cup Holder Operating And Cleaning Instructions - La-Z-Boy XR Instrucciones De Operación

PowerReclineXR
Troubleshooting
Power Supply Replacement
If the power supply must be replaced:
1. Unplug the power supply from the electrical outlet.
2. Disconnect the 120 volt power cord from the power supply, and disconnect the power
supply from the motor connector; refer to the Assembly Instructions.
3. Connect the new power supply to the motor connector or (Y-cable), and close the locking cover
when applicable. Connect the 120 volt power cord to the new power supply; refer to the
Assembly Instructions.
4. Proceed to the Battery Backup Assembly Instructions.
28
& PowerReclineXRw
® ™
Furniture Placement Guide
& Cup Holder Operating and Cleaning Instructions
WARNING
– To reduce the risk of serious injury:
• Provide a clear path for operation of the back and legrest. Place tables and area rugs
at a distance to allow the legrest to fully extend without rubbing or interference.
To place your reclining unit the proper distance from the wall, fully recline the unit and leave
a minimum of 2" of space between the top of the back and the wall.
Place tables and area rugs at a distance to allow the legrest to fully extend without rubbing
or interference.
Operating and Cleaning Instructions for the LED Lighted Cup Holder:
Lightly touch the indented circle on the inside of the cup holder with your finger to turn the cup
holder light on and off. No pressure is necessary to operate the cup holder light.
The finish on the cup holder can be damaged during use or cleaning. It is recommended that a
coaster be used to reduce the chance for damage, and that the cleaning instructions be followed.
Use water and mild soap, such as dish soap, to clean the cup holders. Dry immediately and
thoroughly with a soft clean cloth to maintain the finish.
The use of harsh, abrasive cleaners is not recommended and must be avoided.
29