Lagrange Raclette 6 Modo De Empleo página 39

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
You can place a dish that is resistant to high temperatures on
the upper tray in order to keep your potatoes or other foods
hot. Be sure to put a little water at the bottom of the dish
however to make sure that the food does not burn on the
bottom of the dish.
*Important: the handles of the raclette pans may become very
hot due to the radiant heat from the element. For your comfort,
grasp pans only by the translucent portion of the handle.
Grill on glass function:
Place the appliance on a flat surface.
Unroll the cord completely.
Plug in the appliance and turn the switch on; the indicator
will light up.
NB: the upper glass tray has printing on it. Do not cook on
the marking which must be on the underside of the glass.
To check this, the name "Vitro' Grill" should be written in this
place.
Preheat your unit for 15 minutes.
NB: the red pattern on the upper glass turns brown
when the grill is hot and returns to its initial red color
once the unit has cooled down.
Just before starting to cook, take a small brush or a paper
towel and lightly coat the upper glass tray with oil.
Put on the food to be cooked (small pieces of meat, bacon,
sliced vegetables, etc.)
Turn over the food using the scraper /spatula, to cook it on
both sides.
Once the food has been cooked, slide it onto a plate, putting
the side of it under the glass.
MAINTENANCE
Always unplug the appliance and let cool completely
before cleaning.
Your appliance has glass trays and consequently requires special
care during cleaning and maintenance.
Fixed trays of toughened and resistant glass:
Remove the upper borosilicate glass tray to clean the upper
side of the toughened glass trays. Clean with a sponge, a little
hot water and liquid detergent.
Note: To avoid scratching the glass, never use an
abrasive sponge or metal pad.
Note: the glass trays are fixed, do not try to remove
them.
Then turn the unit over gently to clean the underside of the
glass trays.
Let sit for 2 to 3 minutes. Then, before the water evaporates
completely, dry the trays with paper towels.
Dry the element thoroughly.
Tip: to remove stubborn stains and grease more easily, use
glass cleaner.
37
Tabla de contenido
loading

Tabla de contenido