Active OLIVATOR Manual De Empleo Y Mantenimiento página 22

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

The battery, not provided, must never be connected to the battery charger while used.Now you
can switch ON (-N) and start operating the machine.
Now you can switch ON (-N) and start operating the machine.
Use only 12V batteries. Do not use the machine with low battery.Outside temperature
between +1°C and +40°C.
Codes E4800L- E4800XL E4800L HD - E4800XL HD Ref. fig. C.2
Before connecting the machine to the battery check the operating switch -N- in the OFF position.
Then proceed as follows:
Link the connector positioned at the bottom of the pole -D- to the connector -E- positioned at
the end of the extension cable -S- and screw it.
Insert the other connector -F- of the long cable S into the socket -G- on the electronic box -B-.
Connect the electronic box -B- to the battery,12-24V, through the 2 nippers, the red one on the
positive (+) and the black one on the negative (-).
The battery, not provided, must never be connected to the battery charger while used.
Now you can switch ON (-N) and start operating the machine.
Maximum tension on the electronic circuit 29V. Over this vale the circuit could be damaged.
Minimum tension from the battery 8V.
Outside temperature between +1°C and +40°C.
Codes E4800BPL HD-E4800BPXL HD - Ref. fig. C.3
Before connecting the machine to the battery check the operating switch -N- in the OFF position.
Then proceed as follows:
Link the connector positioned at the bottom of the pole -D- to the connector -E- positioned at
the end of the extension cable -S- and screw it.
Insert the other connector -F- of the long cable S into the socket -G- on the electronic box -B-.
The power supply B is connected to the knapsack battery H.
Switch on the battery with the J switch.
The battery must never be connected to the charger while used.Now you can switch ON (-N)
and start operating the machine.
Now you can switch ON (-N) and start operating the machine
The electronic box of E4800 BPL HD - E4800 BPXL HD must be connected ONLY to the original
ACTIVE battery.
ACTIVE battery characteristics: nominal voltage 32V – Capacity 10Ah.
Outside temperature between +1°C and +40°C.
5.
OLIVE HARVESTER USE
Codes E1200L- E1200XL
The machine power supply is provided by a lead acid accumulator – 12V battery - 70÷80Ah (not
included) that, through a 10m long power cable with clamps for the connection to the battery, can give
power directly to the motor of the machine. Since there is no adjustment of the supply voltage, the motor
rotation speed is maximum when the battery is charged, and decreases slightly while the battery is
discharging. This situation is normal. When the tines rotating speed reduces intensely, you have to switch
off the machine and charge the battery. It is very important to connect the clamps of the cable to the
battery when the switch is off, to avoid the machine starts working suddenly.
Always turn off the switch every time you need to stop the machine or disconnect a cable. In case of
overloading, with excessive effort of the head among the branches, the motor stops automatically in
order to protect all the parts of the machine. Waiting for a few minutes, the machine re-start working
ACTIVE S.r.l. - Via Delmoncello, 12 - 26037 San Giovanni in Croce - CR
Tel. 0375/94172
www.active-srl.com
22
Tabla de contenido
loading

Este manual también es adecuado para:

E1200 lE1200 xlE4800 lE4800 xlE4800 l hdE4800 xl hd ... Mostrar todo

Tabla de contenido