Intended Use Of This Power Tool; Prohibited Use Of This Power Tool; Electrical Safety; Outdoor Use - Evolution Evosaw Instrucciones Originales

Read Instructions
Triman - Waste Collection
INTENDED USE OF
(1.10)
THIS POWER TOOL
WARNING: This product is a Hand Operated
Chop Saw and has been designed to be used
with genuine Evolution blades. Only use
accessories designed for use in this machine
and/or those recommended specifically by
Evolution Power Tools Ltd.
When fitted with an appropriate blade
this machine can be used to cut:
• Mild Steel
• Aluminium
PROHIBITED USE
(1.11)
OF THIS POWER TOOL
WARNING: This product is a Hand Operated
Chop Saw and must only be used as such.
It must not be modified in any way, or used
to power any other equipment or drive
any other accessories other than those
mentioned in this Instruction Manual.
WARNING: This machine is not intended
(1.13)
for use by persons (including children)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning the safe
use of the machine by a person responsible
for their safety and who is competent in its
CE certification
CSA certification
& Recycling
Warning
6
www.evolutionpowertools.com
safe use. Children should be supervised to
ensure that they do not have access to, and
are not allowed to play with, this machine.

ELECTRICAL SAFETY

(1.14)
This machine is fitted with the correct moulded
plug and mains lead for the designated market. If
the supply cord is damaged, it must be replaced
by a special cord or assembly available from the
manufacturer or its service agent.

OUTDOOR USE

(1.15)
WARNING: For your protection, if this tool is
to be used outdoors it should not be exposed
to rain, or used in damp locations. Do not place
the tool on damp surfaces. Use a clean, dry
workbench if available. For added protection
use a residual current devise (R.C.D.) that will
interrupt the supply if the leakage current to
earth exceeds 30mA for 30ms. Always check the
operation of the residual current devise (R.C.D.)
before using the machine. If an extension cable
is required it must be a suitable type for use
outdoors and so labeled.
The manufacturer's instructions should be
followed when using an extension cable.
POWER TOOL GENERAL
(2.1)
SAFETY INSTRUCTIONS
(These General Power Tool Safety Instructions
are as specified in BS EN 60745-1:2009 & EN
61029-1:2009).
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) General Power Tool Safety Warnings
(2.2)
[Work area safety].
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.