Head Inclination; Important - FOM INDUSTRIE SIKA PLUS Manual - Uso - Mantenimiento

8.3.2 HEAD INCLINATION

IMPORTANT:

before inclining the head the LH vice jaw "1" - Fig. 08-05, must be removed by undoing the screws "2" - Fig.
08-05, and substituting it with the vice jaw provided.
1
To incline the head from 90° to 45° to the left including the intermediate angles, undo screw "A" - Fig. 08-06, then incline
the head while reading the angle off the vernier "B" - Fig. 08-06.
Lastly, tighten screw "A" - Fig. 08-06.
The head can also be rotated and inclined simultaneously to the left.
2
A
47
SIKA PLUS
08-05
B
08-06
GB