Adjustments; Horizontal Vices Positioning - FOM INDUSTRIE SIKA PLUS Manual - Uso - Mantenimiento

GB
SIKA PLUS
8

ADJUSTMENTS

8.1 HORIZONTAL VICES POSITIONING (Fig. 08-01)
For best positioning of the horizontal vices on the surface of the profile, the methods below should be followed:
1) Undo release handle "A" to set the distance from the profile.
2) Undo release handle "B" to adjust the vices assembly both vertically and laterally.
The horizontal vices are equipped with a safety valve to prevent opening: if the air supply to the vice fails (when they
are closed) they will not open; when the air supply returns the machine fucntions are restored.
A
44
B
08-01