Emerson PRO SERIES CF712AB02 Manual Del Usuario página 20

BP7300-7 CF712 PRO SERIES.qxp_BP7300 3/2/15 1:48 PM Page 20
12. Installing the Light Fitter and Glass
12.10
Remove the finial nut and outer bowl cap from the light
kit assembly (Figure 30).
Pass the fan switch pull chain through the bushing in
the bowl cap (Figure 30).
To avoid possible fire hazard, do not exceed wattage
indicated on the fitter.
12.11
Position the glass bowl over the threaded nipple and
seat bowl on bowl cap (Figure 31).
Pass the fan pull chain through the bushing in the outer
bowl cap and install the cap on the threaded nipple.
Install finial nut finger tight.
Be sure that the fan switch chain does not make
contact with the light bulbs. If necessary reposition
the light fitter to avoid the fan switch chain from
touching the light bulbs.
12.12
Install pendants onto light kit assembly pull chain and
ceiling fan speed switch pull chain using couplings
NOTE: It is advisable to periodically check the
provided (Figure 32).
tightness of the finial.
WARNING
!
CAUTION
Figure 30
Figure 31
CEILING FAN SPEED
SWITCH PULL CHAIN
LIGHT KIT ASSEMBLY
PULL CHAIN
Figure 32
20
(Continued)
FAN SWITCH
PULL CHAIN
LIGHT KIT
ASSEMBLY
BOWL CAP BUSHING
FINIAL NUT
GLASS BOWL
OUTER BOWL CAP
FINIAL NUT
COUPLINGS (2)
PENDANTS (2)
U.L. Model No.: 52-ANT