Troubleshooting - Philips BlueTouch PR3733 Manual Del Usuario

ENGLISH
16
Problem
The BlueTouch Pain Relief
Patch suddenly switches off
during treatment.
The BlueTouch Pain Relief
Patch does not appear to
work for me, for I notice no
effect.
1 Clean the BlueTouch Pain Relief Patch with a damp cloth after use.
2 You can wash the BlueTouch Pain Relief straps in the washing
machine when they are dirty.
Caution: To prevent damage to the BlueTouch Pain Relief straps and
other clothes in the washing machine, wash the straps in a fine-mesh
washing bag.
Note: Use a gentle cycle and a temperature of 30°C maximum.
Dry the BlueTouch Pain Relief straps on the air and not in the tumble dryer.
Do not iron the straps.

Troubleshooting

This chapter summarises the most common problems you could
encounter with the BlueTouch Pain Relief Patch. If you are unable to solve
the problem with the information below, contact Philips.
Possible cause
The pre-set treatment time
has elapsed.
It may take two weeks
before the effects become
noticeable.
Solution
The BlueTouch Pain Relief Patch is
programmed to switch off automatically
after the treatment time in the selected
treatment mode has elapsed. Just before
it switches off you hear a triple tone
(high to low).
Be patient and allow more time for the
effects to become noticeable.