Error Display; Specifications - Sharp FP-J80EU Manual De Uso

ERROR DISPLAY

• The concentration of Plasmacluster ion is
descending.
Maintain the Plasmacluster Ion Generating
Unit (electrode section).
• Is the the Plasmacluster Ion Generating Unit
inserted properly?
Pull out the the Plasmacluster Ion Generating
Unit and insert it to the end again, and then
carry out the operation again.

SPECIFICATIONS

Model
Power supply
Fan Speed Adjustment
Fan Speed (m
Noise Level (dBA)
Rated Power (W)
Standby Power (W)
Recommended Room Size (m
High density Plasmacluster ion
recommended room size (m
Cord Length (m)
Dimensions (mm)
Weight (kg)
*1 • The recommended room size is appropriate for operating the main unit of maximum fan speed.
• The recommended room size is an area in which a given amount of dust particles can be removed in 30 minutes. (JEM1467)
*2 • Room size in which approximately 25000 ions per cubic centimetre can be measured in the centre of the room when the main unit is
placed next to a wall, is running at MED mode settings, and is at a height of approximately 1.2 metres from the floor.
Standby Power
When the main unit's power plug is inserted in a wall outlet it consumes standby power in order to operate electrical
circuits. To conserve energy, unplug the power cord when the main unit is not in use.
MAX
3
/hour) 480
47
48
2 1
) *
2 2
) *
FP-J80EU
220 - 240 V 50 - 60 Hz
MED LOW
288 60
45 15
28 4.0
1.3
~ 62
~ 35
416 (W) × 291 (D) × 728 (H)
10.6
EN-13
• Unplug the Main Unit, wait one
minute, and then plug the Main
Unit in again.
FP-J60EU
MAX MED
396 222
43 40
38 18
1.2
~ 48
~ 26
2.0
10.0
LOW
60
15
3.6