Installation Of Camera Drivers And Software; Initial Settings - Optika Italy SFX Serie Manual De Instrucciones

8.

Installation of camera drivers and software

Only for SFX-91D
Operating system requirements: Windows XP, Windows 7, Windows 8 or Windows 10.
If your PC is Windows XP: before the installation of your Camera please check if Service Pack2 is installed. If
not, please update your XP from the Microsoft web site.
If your PC has a USB port less than 2.0, there may be some problems in capturing image from the camera due
to the slow transmission.
1. Please insert your CD and run: \optika vision lite \ setup.exe
2. Now Optika Vision Lite icon appears on your desktop.
3. Open the folder "\Drivers" and run all the ".exe" files.
4. The installer may show warnings about missing Windows certification: ignore such warnings and select
"Continue".
• Note : do NOT cancel the installation.
5. At the end of the installation process restart the PC if requested.
6. Plug the Camera in your PC: the camera will be identified and Windows will recognize the driver which has
just been installed from the CD.
Then ignore any message about Windows compatibility and select "Continue" .
• Note : do NOT cancel the installation.
7. System is ready.
9.

Initial settings

Once started the software, the user must set some parameters in order to achieve a proper function of the whole
system.
1. Click on the microscope icon. The following dialog appears:
2. Select Optika TCD Camera.
3. A new dialog appears:
4. Press OK.
Page 19