Replacing The Cutter Unit - Brother QL-650TD Guia Del Usuario

50
STEP3 Maintenance and Troubleshooting

Replacing the cutter unit

Eventually the cutter blade on the cutter unit will become dull and need to be replaced.
When this happens, purchase a new replacement cutter unit and install it according to
the following procedure. For assistance in purchasing a replacement cutter unit, refer to
"Accessories (For USA Only)" in page 58.
1
Check that the cutter unit is located in the home position.
2
Turn OFF the power and pull out the power cord from the wall
outlet.
3
Open the DK Roll cover and pull the roll
release lever to the up position. Remove the
DK Roll.
4
Lift up the cutter cover.
5
Using a Phillips-head screwdriver, loosen
the screw which holds the cutter unit in-
place.
The screw of cutter unit cannot be removed to
prevent the malfunction of the printer.