Function Setting - Hoover HSBF-178 Manual De Instrucciones

on the drawers. Otherwise, the refrigerator
could topple and fall or jam the hands.
Cleaning before use
Wipe the inside of the Refrigerator with a weak
solution of bicarbonate of soda. Then rinse with
warm water using a damp sponge or cloth.
Wash the baskets and shelves in warm soapy
water and dry completely before replacing in
the Refrigerator. The external parts of the
Refrigerator can be cleaned with wax polish.
Safety check after cleaning
Damaged power cord or not.
Whether the plug is well inserted into the wall
outlet.
Abnormal heat from the plug or not.
Parts disassembling
Refrigerator bottles.
Hold the bottles and take them out upwards.
Refrigerator shelves.
Hold the front of the shelves and withdraw
them by lifting the back.
Before plugging in YOU MUST
Check that you have a socket which is
compatible with the plug supplied with the
Refrigerator. If not see the section called
ELECTRICAL INFORMATION .
Before switching on!
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER
MOVING THE REFRIGERATOR.
The coolant fluid needs time to settle. If the
appliance is switched off at any time, wait 30
minutes before switching back on to allow the
coolant fluid to settle.
Before filling your Refrigerator
Before storing foods in your Refrigerator, turn
the Refrigerator on and wait for 24 hours, to
make sure it is working properly and to allow the
Refrigerator to fail to the correct temperature.
START
The display control panel is in the middle of
refrigerator door. interface display as follows:
Button instruction:
1."Refrigerator "button-setting the temperature
of refrigerator
2."Fridge"button-setting the temperature of
refrigerator
3."Function"button-setting the refrigerator at
fast freezing or intelligence status
4."OK" button-To confirm the temperature or
function status setting.

FUNCTION SETTING

First power on
When the refrigerator first power on, the
control panel will back to normal display after 2
seconds.
Control panel operation
There is no operation on refrigerator when the
door closed in 3minutes,the light of control
panel will be off
Open the door and press any button, the light
will be on.
Setting the temperature
refrigerator
Press the "refrigerator" button can set the
refrigerator temperature. At the first pressing,
the refrigerator temperature showed at blink,
then to press continue, the temperature will
change 1℃ with each pressing.
The temperature setting of refrigerator is
circulating as below:
-24℃ -- -23℃-- -22℃-- -21℃-- -20℃-- --19℃-- -
18℃-- -17℃-- -16℃-- -24℃
Setting the temperature of fridge
Press the "fridge" button can set the
refrigerator temperature. At the first pressing,
the refrigerator temperature showed at blink,
then to press continue, the temperature will
change 1℃ with each pressing.
The temperature setting of fridge is circulating
as below:
of
29