Ryobi EJS-500QEO Manual De Utilización página 13

GB
F D
GENERAL SAFETY RULES
Do not use the power tool if the switch does not turn it
■
on and off. Any power tool that can not be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before
■
making any adjustments, changing accessories or
storing the power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of reach of children and do
■
not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for mis-alignment or
■
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
■
maintained tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
■
in accordance with these instructions and in the manner
intended for the paricular type of power tool, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
SERVICE
Have your power tool serviced by a qualified repair
■
person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
DESCRIPTION
1. Switch
2. Variable Speed Control Selector
3. Lock-on Button
4. Safety Guard
5. Base
6. Notch
7. Saw Blade
8. Orbital Adjustment Knob
9. Dust Port
10. Bevel Lock Lever
11. Blade Storage Area
12. Roller Guide
13. Slot
14. Edge Guide
E I P NL S DK N FIN GR
English
15. Edge Guide Lock Screw
16. Quick Release Lever
17. Live tool indicator
SPECIFICATIONS
Voltage
Input Power
Stroke Per Minute
Stroke Length
Max Cutting Capacity:
- Wood
- Steel
FEATURES
KNOW YOUR SAW
Before attempting to use your saw, familiarize yourself
with all operating features and safety requirements.
ELECTRICAL CONNECTION
Your saw has a precision built electric motor. It should be
connected only to a power supply of the type specified by
its rating plate. Do not operate this tool on direct current
(DC). A substantial voltage drop will cause a loss of power
and overheating. If your tool does not operate when
plugged into an outlet, double-check the power supply.
OPERATION
SWITCH (Fig. 1)
To turn your saw ON, depress the switch (1).
■
Release switch trigger to turn your saw OFF.
■
LOCK-ON BUTTON (Fig. 1)
Your saw is equipped with a lock-on (3) feature, which is
convenient when continuous cutting for extended periods
of time is required. To lock-on, depress the switch trigger,
push in and hold the lock-on button located on the side of
the handle, then release switch trigger. Release lock-on
button and your saw will continue running.
To release the lock, depress the switch trigger and
release.
9
RO
H CZ RUS
EJS-500QEO
230 V ~ 50 Hz
500 W
0 - 2600 min
16 mm
75 mm
6 mm
WARNING
Do not allow familiarity with tools to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict severe injury.
HR
PL SLO TR
EJS-600QEO
230 V ~ 50 Hz
600 W
-1 600 - 2600 min -1
20 mm
75 mm
8 mm