Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8.0 LABELING, ID/LOT NUMBERS, MANUFACTURING DATES
The Lad-Saf
Flexible Cable Vertical Safety System Tag must be securely attached and fully legible.
™
System Tag Markings and RFID Tag (see Figure 11):
1
Installation Date
2
Installed By
3
Anchorage Requirements
4
Max Users Per System
The following Lad-Saf
X3 Detachable Cable Sleeve labels must be securely attached and fully legible:
™
Label in Figure 12, Model 6160054:
1. Model Number
2. Serial Number
3. WARNING: Failure to heed warnings may result in serious injury or death. Read and follow manufacturer's instructions
supplied with this product. Use only with DBI-SALA approved system and harness. Inspect before each use. Attach sleeve
to frontal D-ring on harness with supplied connector. Do not grasp the sleeve or cable while actively climbing.
Label in Figure 13, Model 6160054:
1. UP orientation of sleeve body.
Fixed Side Plate in Figure 14, Model 6160054:
1. ID/Lot Number (YYMMWWTT): YY = last two digits of year of manufacture. MM = month of manufacture. WW = week of
year of manufacture. TT = internal 3M use only.
Label in Figure 15, Model 6160054:
1. Maximum distance allowed between system cable and harness attachment point is 9 inches (23 cm).
2. Do not use with Lanyard.
5
System Length
6
Date of Manufacture
7
Date Inspected
8
System serial number
9
System warnings
10 Cable type and sleeve compatibility matrix along with
standards certifi cation.
11 RFID Tag
11
Tabla de contenido
