Memory Scan; Public Address; Weather Alert - Uniden MC 1020 Guia De Funcionamiento

Memory Scan

To scan channels stored in Memory Scan, press and hold STEP. In the
Memory Scan Mode, the MC 1020 scans only those channel numbers
previously entered into Memory Scan. If no channel has been entered into
Memory Scan, the error tone sounds and the LCD Panel does not change.
Note: While in SCAN, pressing the 16/9 button three times or pressing
and holding STEP will return the radio to the channel it was on prior
to accessing Memory Scan.

Public Address

To access the Public Address Mode, press and hold H/L. The
appear in the display. Press the Press-To-Talk switch on the microphone, hold
the microphone approximately two inches from your mouth, and speak clearly
in a normal voice. To cancel

Weather Alert

The Weather Alert Mode can be activated to alert you of dangerous weather.
When Weather Alert is turned on, and a warning signal is received, a siren will
sound at full volume, regardless of the VOL setting. When the signal stops,
you will hear the active weather channel broadcast at normal volume.
The icon indicates the Weather Alert Mode is activated. To activate the
Weather Alert Mode:
1. Press WX to select Weather mode press and hold WX.
2. Press and hold STEP to begin Weather Channel Scan.
—or—
1. Manually select the active Weather Channel after selecting WX.
2. Press and hold WX to activate the Weather Alert Mode. To cancel the
Weather Alert Mode, press and hold WX again.
, press and hold H/L.
11
icon will