Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Customer Assistance - Bosch GBS 75 AE Professional Manual Original

14 | English
Apply the machine to the workpiece only when switched on.
Work with moderate feed and carry out the sanding with par-
allel and overlapping strokes. Sand in the direction of the
grain; sanding across the grain produces an uneven sanding
effect.
Particularly when sanding coats of varnish, sand in the direc-
tion of the grain as the varnish could melt and smear the sur-
face of the workpiece and the sanding belt. Therefore, work
with dust extraction.
A sanding belt used for sanding metal should not be used for
other materials.
Use only original Bosch sanding accessories.
Store sanding belts only hanging; avoid creasing, as this
makes the belts unusable.
The sanding frame (accessory) allows for uniform and con-
trollable removal capacity when surface grinding larger wood-
en surfaces.

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself, pull the mains
plug.
For safe and proper working, always keep the machine
and ventilation slots clean.
Remove adherent sanding dust with a brush.
Cleaning the Dust Passage (see figure B)
From time to time, remove the protection cover 11 and clean
the dust passage 12 so that the suction capacity remains at an
optimum level.
Changing the Graphit Plate (Accessory) (see figure C)
The graphite plate 13 (accessory) is screwed onto the guide
plate 14 and enables an optimum sanding pattern.
The graphite plate 13 is subject to wear, depending on the in-
tensity of usage. To change the graphite plate 13, remove the
sanding belt 2. Unscrew the graphite plate 13 and replace it.
After mounting the sanding belt, adjust the belt run as de-
scribed in section "Changing the Sanding Belt" on page 13.
If the machine should fail despite the care taken in manufac-
turing and testing procedures, repair should be carried out by
an after-sales service centre for Bosch power tools.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
1 619 929 J84 | (12.4.12)
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: [email protected]
Bosch Power Tools