Technical Data; Noise Information; Vibration Information - Worx WX615 Manual Original

12. REBATE GUIDE
13. DUST BAG
14. PARALLEL GUIDE
15. PARALLEL GUIDE ADJUSTING KNOB
16. BLADE
17. CLAMPING ELEMENT
18. CLAMPING SCREW X3
19. BASEPLATE STAND (SEE FIG. B)
Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

WX615(620-629-designation of
Type
machinery, representative of Planer)
Rated voltage
Rated power
Rated no-load speed
Protection class
Max cutting depth
Max rebating depth
Max cutting width
Machine weight

NOISE INFORMATION

A weighted sound pressure:
A weighted sound power:
K &K = 3.0 dB (A)
PA WA
Wear ear protection.
Planer
220-240 V~50/60 Hz
750 W
17000 /min
/ll
3 mm
12 mm
82 mm
3.0 Kg
L = 78.9 dB (A)
pA
L = 89.9 dB (A)
wA
VIBRATION
INFORMATION
Vibration total values (triax vector sum)
determined according to EN 62841:
Vibration emission value: a
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise
emissions during actual use of the power tool
can differ from the declared value depending on the
ways in which the tool is used especially what kind
of workpiece is processed dependant on the
following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing
the job. This may significantly reduce the exposure
level over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
= 3.404 m/s
2
h
EN
9