Safety Instructions For Planers; Component List - Worx WX615 Manual Original

tool's operation. If damaged, have the
power tool repaired before use.
accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed.
Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
safety of the power tool is maintained.
SAFETY INSTRUCTIONS
FOR PLANERS
1. Wait for the cutter to stop before setting
8
the tool down.
engage the surface leading to possible loss of
control and serious injury.
2. Hold the power tool by insulated gripping
surfaces only, because the cutter may
contact its own cord.
may make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
3. Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
hand or against the body leaves it unstable and
may lead to loss of control.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Double insulation
Warning
Planer
Many
Properly
Slippery
This will ensure that the
An exposed rotating cutter may
Cutting a "live" wire
Holding the workpiece by your
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must not
be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice.
Wear protective gloves
Before any work on the machine
itself, pull the power plug from the
outlet.
Lock
Unlock

COMPONENT LIST

1. HAND GRIP AREAS
2. ON/OFF SWITCH
3. WRENCH
4. DUST EXTRACTION PORT
5. V-GROOVE
6. PARALLEL GUIDE LOCKING KNOB
7. PLANNING DEPTH SCALE
8. DEPTH ADJUSTMENT KNOB
9. DUST EXTRACTION GUIDE SWITCH
10. LOCK OFF BUTTON
11. REBATE GUIDE LOCKING KNOB
EN