Wahl 1584 A Manual De Instrucciones página 9

Operation
Preparation
Keep the packaging material for safe storage or transport
later.
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the appliance with the voltage stated on
the nameplate.
Charging the battery
1. Connect the appliance plug of the plug-in transformer to the charg-
ing stand socket (Fig. 4ⓐ).
·
The appliance can also be connected directly to the
plug-in transformer for charging (Fig. 2ⓐ/ⓑ).
·
Battery overcharging is prevented thanks to intelligent
charge management.
2. Connect the plug-in transformer to the mains socket (Fig. 4ⓑ).
3. Switch off the appliance using the on/off switch (Fig. 3).
4. Place appliance in the charging stand or connect directly to the
plug-in transformer (Fig. 2ⓐ/ⓑ). The charging process starts.
·
During the charging operation, the charging indicator on
the on/off switch flashes green.
·
After the appliance has been removed from the charging
stand, the charging indicator will go out (power saving
mode).
5. Once the battery is fully charged, the charging indicator on the on/
off switch shines green.
Battery operation
1. Switch on the appliance using the on/off switch and switch off after
use (Fig. 3).
·
The battery power indicator on the on/off switch will
start flashing green when the battery has < 5% power
remaining. The battery needs to be recharged.
·
The accuracy of the battery power indicator can be
increased by fully discharging the battery from time
to time and then recharging it in one uninterrupted
charging process.
·
In case of insufficient maintenance of the blade set, the
operating time can be reduced considerably.
2. Use the on/off switch to switch off the appliance after use (Fig. 3).
Mains operation
Caution! Damage due to use of the hair clipper with the
plug-in transformer permanently plugged in (mains
operation)
The hair clipper is not designed to be used with the plug-in
transformer permanently plugged in (mains operation). The
plug-in transformer connecting cable is not designed for
mechanical stress in continuous operation.
f Mains operation is only recommended for short periods
of use, in the event of an empty battery.
1. Connect the appliance plug on the plug-in transformer to the appli-
ance socket (Fig. 2ⓐ).
2. Connect the plug-in transformer to the mains socket (Fig. 2ⓑ).
3. Use the on/off switch to switch off the appliance after use (Fig. 3).
Operation
Cutting with attachment comb
The appliance can also be operated with an attachment comb.
f The attachment comb has several detent positions for adjusting the
cutting length (Fig. 6ⓐ/ⓑ).
f The further the attachment comb is pushed onto the blade set, the
shorter the cutting length.
Attaching/removing the attachment comb
1. Slide the attachment comb onto the blade set (Fig. 5ⓐ) in the
direction of the arrow until it locks in place.
2. The attachment comb can be removed by pushing it in the direc-
tion of the arrow (Fig. 5ⓑ).
Maintenance
Warning! Injuries and material damage due to incorrect
handling.
f Switch off the appliance before cleaning it or performing
any maintenance and disconnect it from the mains.
Cleaning and care
Danger! Electric shock due to penetration of liquid.
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the appliance.
Caution! Danger from aggressive chemicals.
Aggressive chemicals could damage the appliance and
accessories.
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil recom-
mended by the manufacturer.
Accessories and spare parts are available from your dealer or
our service centre.
E N G L I S H
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
9
ar