Medion MD 81035 Manual De Usuario página 41

Programming the volume/mute universal functions
to a particular device
You can program the universal remote control in such a way
that it will use only that particular device's own volume and
mute functions. The universal function for this mode or de
vice type is therefore switched off.
1. Keep the SETUP key pressed down for approx. 3
seconds until the background lighting of the source key
flashes for a short time and then remains permanently
lit.
2. Press the
briefly.
3. Press the source key for the device that is only to have
its own volume and mute functions.
4. Press the desired volume key. The light of the source
key remains lit.
5. Press the
extinguish.
Restoring the universal volume/mute functions
If you have changed the universal volume and mute
functions, as described in the previous two sections, you
can reset the functions back to the factory settings and thus
restore the "Punch Through" effect.
1. Keep the SETUP key pressed down for approx. 3
seconds until the background lighting of the source key
flashes for a short time and then remains permanently
lit.
2. Keep the
light extinguishes briefly.
3. Press
completely. The volume and mute functions are now
restored to their factory defaults.
key until the source key light extinguishes
key again, and the source key light will
key pressed down until the source key
again. The source key light will extinguish
12