Movement R1 Manual Do Proprietário página 91

MAINTENANCE
CONSOLE
ITEM
Explosion-proof:
abnormal supply voltage or abnormal engine
E6
will cause damage to the drive motor circuit.
A. The communication cable isn't
properly connected or the cable
Display LED
is broken.
values blink
B. Console broken cable
A. Loose screw on the
Display
console is
display board
incomplete or
missing cables
B. Broken system
ENCONTRE PONTO AUTORIZADO PERTO DE VOCÊ
In case of any problem on your treadmill contact an Authorized Point e request a
technical visit. Any questions can be answered through our curstomer service center by
telephone 0800-7724080. Never try to replace any piece nor make any modifications
on your treadmill. Risk of losing warranty. To find an Authorized Point visit the website
http://movement.com.br/assistenassistencia-tecnica and allow the browswe to access
your location.
When contacting an Authorized Point, keep in hands the following documents:
•Purchase invoice, copy or original (in case of warranty):
•Model:
•Serial Number:
•Purchase invoice date:
CAUSE
42
MAINTENANCE
The treadmill stops working and starts
failure mode when an alert sound plays
9 times. The console displays the fault
code. After maintaining the fault mode
for about10 seconds, the equipment
enters on stendby, restart the equipment.
Reasons: check if the power source
voltage is inferior to 50% of the regular
voltage. Test it again with the correct
voltage;
Check if the controller has a peculiar
smell and replace it;
Check that the motor cable is connected
correctly and reconnect it.
Check and connect the cables properly
or replace the broken cables.
Replace the console
Tighten the screw
Replace the console