Troubleshooting - Philips EXP 501 Manual De Instrucciones

WARNING
Under no circumstances should you try to repair the unit yourself
as this will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the unit
for repair. If you are unable to solve a problem by following these
hints, consult your dealer or service center.
Problem
No power, playback
does not start
HOLD indication
and/or no reaction
to controls
No sound or
bad sound quality
INSERT CD indication
UNFINALIZED CD
indication

Troubleshooting

Solution
– Insert the batteries correctly.
– Replace the batteries.
– Connect the power adapter securely.
– Deactivate HOLD.
– Disconnect the unit from the power supply
or take out the batteries for a few seconds.
– Press 2; to resume playback.
– Adjust the volume.
– The track is a data file. Press § to skip to
the next CD audio track.
– Check and clean the connections.
– Keep this unit away from active mobile
phones or strong magnetic fields.
– Insert a disc, with the label facing up.
– Clean or replace the disc.
– Wait until the steamed up lens has cleared.
– Make sure the inserted CDR(W) is
finalized.
27